Wolf Mini & Micro Torch


 

Overview

All four models are compliant with the 94/9/EC ATEX ‘Explosive Atmospheres’ Directive and certified to IECEx for use in potentially explosive gas, vapour, mist or dust atmospheres, where a T4 or T5 temperature class permits. Additionally, all models are approved to Group I for use in mining applications.

The three models with LED light sources; the M-10 Micro, the M-40 Mini and M-60 Mini are approved as Category 1 equipment for use in Zones 0, 1 and 2, whilst the M-20 Xenon Mini is approved as Category 2 equipment for use in Zones 1 and 2.
The M-10 Micro has a single white 5mm ‘Nichia’ LED light source and is powered by four alkaline LR44 ‘button cells’, giving an impressive beam with a two hour duration from a very compact size.

The M-20 Mini uses a Xenon filament bulb powered by two LR03 ‘AAA’ cells, giving an excellent narrow beam of light with good range and up to 2.5 hours duration. The M-40 Mini has a cluster of three white 5mm ‘Nichia’ LEDs, and the M-60 Mini uses a single 1 watt Luxeon LED giving a remarkable light output; both products are powered by three alkaline LR1 ‘N’ cells giving up to ten hours of usable light.

The Mini and Micro Torch Range have an ergonomic design and are constructed from high quality thermoplastic resin, with excellent impact and chemical resistance. The polycarbonate lens has been set-back within the lens ring to minimise risk of damage. All models have a lanyard hole, an integral pocket clip for secure retention and to prevent roll on a flat surface, and a push-button for single handed switching, which is shrouded to guard against accidental operation. Additionally all models are certified IP67, sealed against water and dust ingress.

Mini and Micro torches are supplied with cells, the M-10 Micro is supplied with a neck cord for added convenience.

Specifications