Implies that the gloves comply with the basic requirements laid down by the EEC directive: Personal Protective Equipment

SIMPLE DESIGN (CATEGORY 1) : For areas of ‘minimal risk’ where the effects of not wearing a glove are easily reversible or superficial. Such products are self-certified.

NTERMEDIATE DESIGN (CATEGORY 2) : For areas of specific risk i.e. mechanical risks. Such products will have been EC type tested against European test methods and certified by a notified body.

COMPLEX DESIGN (CATEGORY 3) : For areas/applications than can seriously or irreversibly harm the health. Such products, in addition to the CE type test, will also have to be either produced under an approved quality system OR be type tested on an annual basis.

EN 388 : This standard applies to all kinds of protective gloves giving protection from mechanical risks, in respect of physical problems caused by abrasion, blade cut, puncture or tearing. This standard also covers risk of electrostatic discharge.

EN 374 : This standard specifies the capability of gloves to protect the user against chemicals and/or micro-organisms.

EN 511 : This standard applies to gloves which protect the hands against convective and contact cold.

EN 407 : This standard specifies thermal performance for protective gloves against heat and/or fire.

EN 659 : This standard defines performance requirements for gloves designed to protect fire fighters against heat and flames.

EN 421 : This standard lays down test methods and performance criteria for gloves offering protection against ionising radiation and radioactive contamination.

To return to our range of protective gloves - Click here